Plug the cable into the "Audio In" port, matching the white plug to the white port and the red plug to the red port. Installing the surround sound requires proper speaker placement and connection to the receiver.
Step Place the center speaker under the center of the television. There are six color-coded ports on the back of the receiver.
Video of the Day Step Power on your television and surround sound system. Step Locate the video "Out" port on the receiver. If placed in a corner, the sub will generate a booming, echoing effect that clouds your sound. It can go either below or above the TV, whichever is closest to ear level.
Step Place the left and right surround sound speakers behind your viewing space, aimed at the point of sound conversion.
Surround sound speakers should be placed just above ear level. Optimal Surround Sound Setup Step Place the left and right speakers on either side of the television. These speakers should also be turned at a degree angle toward the center of the room. The TV may not have all of these connectors; use the best available connector.
Plug the other end into a corresponding input on the TV. Some Phillips Surround Sound Systems may have more speakers. Three feet of gap between the TV and each speaker is generally a good match; place speakers at ear level for better results. Each speaker is labeled as either "Front Left" or "Front Right.
Connecting the Speakers and TV Step Connect the wire from each speaker into the appropriate port on the back of the receiver. Step Connect a video cable from the back of the receiver to an available input on the back of the TV.
Most surround sound receivers have several input slots. Match the connector color to the port color. Point the speakers at a degree angle toward the center of the room. Each speaker is labeled as either "Rear Right or "Rear Left. Attach the cable to the appropriate jack on the receiver. The speakers normally include three front speakers and two rear speakers, as well as a subwoofer.
Step Place the center speaker directly in front of or above the television, facing the point of sound convergence. Step Connect an audio cable from the back of the receiver to either the TV or other device.
Step Place the subwoofer wherever you want. Place the red plug in the red port and the white plug in the white port. Step Place the front speakers to the right and left of the television. The placement of the receiver does not matter as long as the remote control signal and the wires from the speakers can reach the receiver.
Placing the receiver and speakers Step Place the receiver near the television. Step Run the other end of the cable to the surround sound receiver.hello i've been trying to hook up a vcr,tv,dvd,cd,and surround sound it seems every thing is working except when i play a vcr tape i get sound but no picture any suggestions thanks We bought a Philips surrond sound system.
We have a cable box.
We hooked the surround sound through the cable box. Dec 13, · How to Connect TV to Surround sound receiver system setup using HDMI ARC input port, must use hdmi cable, TV & AV receiver must both have Arc, then turn on Hdmi ARC or CEC audio setting, This Author: Tampatec.
Hook up a set of surround sound speakers to your inch Vizio LCD TV to supercharge the audio coming from your TV. Vizio TVs offer two audio output options for connecting your TV to a surround sound receiver: Sony/Philips Digital Interface (optical) and standard audio output.
TV With Audio Out Step. Turn off your television and your surround sound system to prevent any accidental loud noise. Step. Connect an A/V or HDMI cable to your television's "Audio Out" port.Download